tag:blogger.com,1999:blog-79500391758454788312024-03-13T15:29:53.478-05:00Poor Man's RocketryI wanted a quick easy way to share my designs with family and friends and who ever else wanders through.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.comBlogger18125tag:blogger.com,1999:blog-7950039175845478831.post-41801673430981950472015-08-13T22:29:00.000-05:002015-08-13T22:29:40.552-05:00TARC UpdateIt is well past time for an update on my TARC projects and general rocket relate<span id="goog_1589509372"></span><span id="goog_1589509373"></span>d activities. <br />
<br />
I will start by saying that Southern Thunder was not kind to me or my rockets. <br />
<br />
<div>
A test flight of the PMR-TARC15-EMS vehicle was conducted on 20
June, 2015 at the Southern Thunder Launch in Manchester,TN. The result
was a total loss of the vehicle due to failure of the upper gas block.</div>
<div>
</div>
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-5uh3jmygzFU/Vc1egSXqkZI/AAAAAAAAALA/J_qdrryca8Y/s1600/Photo0191.jpg" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" height="320" src="http://3.bp.blogspot.com/-5uh3jmygzFU/Vc1egSXqkZI/AAAAAAAAALA/J_qdrryca8Y/s320/Photo0191.jpg" width="240" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Before Flight</td></tr>
</tbody></table>
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-2U_iDTjRAmc/Vc1elZl0WRI/AAAAAAAAALI/0c_BDY6HsM4/s1600/Photo0223.jpg" imageanchor="1" style="clear: right; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" height="320" src="http://2.bp.blogspot.com/-2U_iDTjRAmc/Vc1elZl0WRI/AAAAAAAAALI/0c_BDY6HsM4/s320/Photo0223.jpg" width="240" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">After "Flight"</td></tr>
</tbody></table>
<div>
The
objective of this test was to verify stability of the vehicle and to
gather data to estimate the Drag Coefficient of the vehicle. Simulations
of the vehicle in Rocksim indicated that a stable flight was likely and
that a delay of 5 seconds would deploy the recovery system at apogee.
The selected motor was an Aerotech E18-7 with the delay adjusted
according to Aerotechs instructions to be approximately 5 seconds.</div>
<div>
</div>
<div>
Launch
conditions were less than ideal with strong gusting winds. The Launch
rod was angled into the wind to aid in recovery and was not adjustable.
The rocket achieved a stable flight, but there was significant weather
cocking due to the high winds, this in combination with the launch angle
resulted in a very low apogee altitude. The rocket impacted the ground
without the recovery system being deployed. Post flight inspection on
the range suggests that the ejection gases may have been blocked from
entering the recovery chamber, as indicated by a lack of soot, but given
the design of the baffle system it is possible that no soot would have
been present at that location had things worked as intended. An
additional potential failure mode would be operator error in adjustment
of the delay. </div>
<div>
</div>
<div>
After returning from the range it
was determined that the ejection gases over pressured the space directly
above the motor and blew out the Gas block at the top of the motor
mount tube. <div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-PiRW-31tK5A/Vc1f-Nfh8oI/AAAAAAAAALU/6TX86nelx5w/s1600/Photo0225.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="320" src="http://4.bp.blogspot.com/-PiRW-31tK5A/Vc1f-Nfh8oI/AAAAAAAAALU/6TX86nelx5w/s320/Photo0225.jpg" width="240" /></a></div>
This pressurized the area around the air-brake linkage
assemblies and vented through the holes under the air-brakes. The end
result was the total loss of the vehicle and significant delay of the
program.</div>
<div>
</div>
<div>
In the future a full ground test of the recovery deployment system will be conducted and all components investigated for damage.</div>
<div>
</div>
<div>
The PMR-TARC14-002 had a parachute separate at deployment which resulted int he parachute being lost and a fin breaking on contact with the ground. The damage is repairable but at this point I am canceling the program and redirecting resources to Geezer TARC Coming up in just over a week.</div>
Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-77266535689290542492014-12-26T07:21:00.003-06:002014-12-26T07:21:54.388-06:00PMR-TARC14As I mentioned in my TARC projects intro this rocket is already complete and has flown "successfully". I am only missing two components for it to meet the competition requirements, an approved altimeter and the foam to protect the eggs. As far as the technical work that remains to be done, i need a reasonable estimate of the drag coefficient so that I can start to develop a model to determine how much ballast I will need to add to hit the target altitude. I am also going to try to see if I can predict the variability of the motor based on some parameter that I can measure out in the field.<br />
Since I am already well over a year behind schedule for this project and am running concurrently with my 2015 project the following table is quite an aggressive flight schedule based on the fact that I will probably have a whining, but cute, 4 year old dividing my attention from every thing that I am trying to accomplish. All in all I am very excited to get this project going again
<br />
<table border="2" bordercolor="#0033FF" cellpadding="3" cellspacing="3" style="background-color: #99ffff; width: 100%px;">
<caption> </caption></table>
<table border="2" bordercolor="#0033FF" cellpadding="3" cellspacing="3" style="background-color: #99ffff; width: 100%px;"><caption>TARC 2014 Planned Flight Schedule</caption>
<tbody>
<tr>
<th>Flight #</th>
<th>Configuration</th>
<th>Motor</th>
<th>Objective</th>
<th>Date</th>
</tr>
<tr>
<td>1</td>
<td>No Egg/No Alt</td>
<td>E18</td>
<td>Stability Check</td>
<td>7/5/2014</td>
</tr>
<tr>
<td>2</td>
<td>No Egg</td>
<td>E18</td>
<td>Estimate Cd</td>
<td>3/2015</td>
</tr>
<tr>
<td>3</td>
<td>No Egg</td>
<td>E18</td>
<td>Estimate Cd</td>
<td>3/2015</td>
</tr>
<tr>
<td>4</td>
<td>Full</td>
<td>F39</td>
<td>Full System Test</td>
<td>5/2015</td>
</tr>
<tr>
<td>5</td>
<td>Full</td>
<td>F39</td>
<td>Qualification 1</td>
<td>5/2015</td>
</tr>
<tr>
<td>6</td>
<td>Full</td>
<td>F39</td>
<td>Qualification 2</td>
<td>6/2015</td>
</tr>
<tr>
<td>7</td>
<td>Full</td>
<td>F39</td>
<td>Qualification 3</td>
<td>6/2015</td>
</tr>
<tr>
<td>8</td>
<td>Full</td>
<td>F39</td>
<td>Competition 1</td>
<td>7/2015</td>
</tr>
<tr>
<td>9</td>
<td>Full</td>
<td>F39</td>
<td>Competition 2</td>
<td>7/2015 </td>
</tr>
</tbody></table>
<br />Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-150291346334616452014-12-25T15:32:00.002-06:002014-12-25T15:32:43.382-06:00PMR-TARC<div>
<div>
<div>
<div>
<div>
<div>
I know that it has been awhile since I posted anything here but honestly that is mostly because I have not had much going on with my rockets other than a few launches and lots of repairs and lamenting that they are incredibly difficult to store. That has changed over the last 18 or so months after I rediscovered TARC. <br />
<br />
The Team America Rocketry Challenge (TARC)
asks students in grades 7-12 to build and fly a rocket to a specific
set of requirements that changes every year. The competition is
designed to test the students ability to preform all of the major tasks
of a large scale project. Then the participants are scored based on achieved
altitude and flight duration with the winners being selected to compete
for some fairly significant prizes. So I decided to try my hand, unofficially of course, at the TARC as a
new and interesting challenge and to focus my hobby a bit more than just collecting more rockets. Plus I figure that with my education and
experience with model rockets I should be able to be competitive with
the top teams.</div>
<div>
<br /></div>
<div>
Currently I am working on two TARC projects
one for the 2014 competition which has now concluded and one for the
2015 competition that Is just getting underway. My plan is to document
my projects here as they progresses. <br />
</div>
<div>
<h3>
<u><b>PMR-TARC14</b></u></h3>
<h3>
<br /></h3>
</div>
<div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-i3k36OBrG3A/VJx-TqV_glI/AAAAAAAAAIQ/iM5EGEUrjC4/s1600/Photo0107.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-i3k36OBrG3A/VJx-TqV_glI/AAAAAAAAAIQ/iM5EGEUrjC4/s1600/Photo0107.jpg" height="320" width="240" /></a></div>
Length: 28 in</div>
<div>
Diameter: 2.2 in</div>
<div>
Dry Mass: 242.6 g</div>
<div>
Payload: Two raw jumbo eggs 123 g</div>
<div>
Motor Mount: 24mm</div>
<div>
Motor: F39-6</div>
<div>
Target altitude: 825 ft</div>
<div>
Target flight time: 48-50 s</div>
<div>
Electronics: The rules require a Perfectflite PNUT but I will initially be using an Estes altimeter.</div>
<div>
Recovery: 2x 20" nylon "custom" parachute.<br />
<br />
Some interesting features on this rocket include the fins, which I made
out of plywood for strength with balsa inserts to save on weight. This
will be my first use of a F impulse motor, as well as personal use of
electronics. To-date it has flown only once, which was mostly a
success. Only one chute deployed and there was no payload. It was
mostly a flight to check the stability, but I enjoyed it and nothing
broke so, success. I have lots more testing planned and am waiting on
funds and launch dates to move forward, which likely won't be until
spring. <br />
<br />
<h3>
<u>PMR-TARC15-EMS</u></h3>
<div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-yy4U55vYEFQ/VJx8JjTD8pI/AAAAAAAAAH0/dZ4X1q1ZT5w/s1600/PMR-TARC15-EMS.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" src="http://1.bp.blogspot.com/-yy4U55vYEFQ/VJx8JjTD8pI/AAAAAAAAAH0/dZ4X1q1ZT5w/s1600/PMR-TARC15-EMS.JPG" height="320" width="279" /></a></div>
<br />
<br />
Length: 31.5 in (26.5 req)</div>
<div>
Diameter: 2.6 in</div>
<div>
Dry Mass: 521.3 g</div>
<div>
Payload: One raw large egg 60 g</div>
<div>
Motor Mount: 24mm</div>
<div>
Motor: F39-6</div>
<div>
Target altitude: 800 ft, 775 ft</div>
<div>
Target flight time: 46-48 s, 45 -47 s</div>
<div>
Electronics: Perfectflite PNUT, Pro Micro from Sparkfun electronics, HS-55 sub-micro servo.</div>
Recovery: Payload and booster recover separately probably on 20" nylon "custom" parachutes.<br />
<br />
This is by far a more ambitious project. My approach for the 2014 rocket and indeed the approach most people use for this type of competition is to chose a motor that will get the rocket close to but above the target altitude and then add mass to adjust the final altitude. This presents a unique challenge for the 2015 competition because when the top teams do their second flight at the finals the target altitude changes from 800ft to 775ft. Just add weight and your good, but to be successful they will have to do more practice flights. <br />
<a href="http://4.bp.blogspot.com/-AiLhw2NJ74Q/VJx8N-l_MJI/AAAAAAAAAIA/uLzbhYwUVmU/s1600/PMR-TARC15-EMS%2BDeployed.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-AiLhw2NJ74Q/VJx8N-l_MJI/AAAAAAAAAIA/uLzbhYwUVmU/s1600/PMR-TARC15-EMS%2BDeployed.JPG" height="320" width="254" /></a>So what is my plan? I am going to scale down the Energy Management System (EMS) that the USU Chimaera Rocket team used in 2009 to win the NASA USLI competition. The Perfectflite PNUT altimeter is capable of streaming telemetry, current altitude, to some other device. I plan to feed that data into a micro controller and have it actuate a servo that will deploy air brakes at the base of the rocket. While the use of the micro controller probably violates the rules i think that it will add an interesting challenge for me and if it works I won't have to add any mass to the rocket and have a perfect flight every time. <br />
<br />
<a href="http://3.bp.blogspot.com/-O_rtH9T_ucI/VJx8N4k9DeI/AAAAAAAAAH8/u6T5zKACQ2A/s1600/EMS.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" src="http://3.bp.blogspot.com/-O_rtH9T_ucI/VJx8N4k9DeI/AAAAAAAAAH8/u6T5zKACQ2A/s1600/EMS.JPG" height="290" width="320" /></a>Christmas has allowed me to start collecting parts and I hope to have this one ready to fly in time for Southern Thunder in late June. Time will tell however if this is just a pipe dream.<br />
<br />
<br /></div>
</div>
</div>
</div>
</div>
</div>
Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-30855425431725042952011-07-09T10:45:00.005-05:002011-07-09T11:32:49.837-05:00Spring In Rocket City USAIt is a well known fact that spring in the high mountain valleys of Utah comes later than most other places. It is also well known that in mid to late June that a very unique kind of garden begins to bloom in a certain garage at a certain address in Midway. Alas it has been several years since the garden bloomed there but I have recently discovered a very similar garden beginning to bud in a certain garage at a certain address in Huntsville, AL. In fact it is probably fairly likely that one could find this type of garden in almost any garage at any address almost anytime of the year. Yes I am talking about the rocket garden. The typical rocket garden life cycle goes from kit/parts to assemble rocket to various stages a painting to the final finished product ready to leap free from the bonds of the earth.... ish. My current crop includes a few classic varieties that are well known along with three never before seen varieties.<br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/-xpVdeUbuPoY/Thh6LwvJ4eI/AAAAAAAAAE0/ryiqxPR0_34/s1600/IMG_1536.JPG"><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;width: 240px; height: 320px;" src="http://3.bp.blogspot.com/-xpVdeUbuPoY/Thh6LwvJ4eI/AAAAAAAAAE0/ryiqxPR0_34/s320/IMG_1536.JPG" alt="" id="BLOGGER_PHOTO_ID_5627382076879266274" border="0" /></a>Some of the classic varieties include Orbital Transport, Comanche III, SuperNova, Gemini DC, The Alien Invader and the very nearly impossible to lose Mighty Moe. The never before seen varieties include the Feather Weight, Star Fighter and an as of yet un-named rocket that we will refer to for now as Leftovers 1.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/-gw-x6aIhYG4/Thh7G_L3jDI/AAAAAAAAAE8/6G_7C0MIfPg/s1600/IMG_1537.JPG"><img style="float:left; margin:0 10px 10px 0;cursor:pointer; cursor:hand;width: 320px; height: 240px;" src="http://1.bp.blogspot.com/-gw-x6aIhYG4/Thh7G_L3jDI/AAAAAAAAAE8/6G_7C0MIfPg/s320/IMG_1537.JPG" alt="" id="BLOGGER_PHOTO_ID_5627383094370077746" border="0" /></a>Feather Weight (pictured on Right)<br />Length: 5.5"<br />Diameter: 0.736"<br />Altitude: 760'<br />Skill Level 1 and a halfish<br /><br />After I built my Estes SolarFlare kit I decided that I would like to try my hand at a ring tail design and this little guy was the result. The Idea is a motor with fins and a nose cone that will be light enough to tumble to the ground instead of having a parachute or streamer. Will it work? We will See.<br /><br />Star Fighter (Front)<br />Length: 20.75"<br />Diameter 1.18"<br />Altitude 880'<br />Skill Level 3 or 4<br /><br />To be honest I am not sure where I came up with this one, but I like the end result. I guess it is part jet fighter part x-wing part "ooh, this would look cool" all mashed into one rocket. The hardest part of constructing this was filling in the gap between the body tube and the cockpit. But I imagine the paint around the tube fins will be a bugger.<br /><br />Leftovers 1 (pictured on left)<br />Length: 7.5"<br />Diameter 0.736<br />Altitude 600'<br />Skill Level 2<br /><br />This as its temporary name implies is made from leftovers of other projects. From the time I sat down with the leftover parts to the rocket in finished ready to paint form was less than 4 man hours most of which was from 2 am to 5 am when the baby woke me up and I couldn't Sleep.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-65763696141225381452010-09-14T20:00:00.003-05:002010-09-21T19:31:24.181-05:00If this isn't an Addiction I don't know what is.So I got to thinking about it the other day and decided that I needed to do an inventory of my rockets. I discovered to my surprise that I have over 50 of them, yes, I said 50. While I am sure that this is not a world record by any means it is more than I expected. I didn't really believe just how many rockets I have because they are spread out all over the apartment so I decided to try to put them all in the same place and this is the result.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/__7oFVxcaSfs/TJlODUTGYPI/AAAAAAAAAEg/LKBAtIbMreo/s1600/IMG_0785.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 320px; height: 240px;" src="http://3.bp.blogspot.com/__7oFVxcaSfs/TJlODUTGYPI/AAAAAAAAAEg/LKBAtIbMreo/s320/IMG_0785.jpg" alt="" id="BLOGGER_PHOTO_ID_5519528637214646514" border="0" /></a>If this isn't an addiction I don't know what is.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com3tag:blogger.com,1999:blog-7950039175845478831.post-47877008325270652662010-07-12T17:01:00.004-05:002010-07-14T20:29:37.017-05:00A flash of inspiration<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/__7oFVxcaSfs/TDuQ4vlWg2I/AAAAAAAAAEI/9RNn_e0dmXE/s1600/Tubes.jpg"><img style="float: left; margin: 0pt 10px 10px 0pt; cursor: pointer; width: 320px; height: 260px;" src="http://2.bp.blogspot.com/__7oFVxcaSfs/TDuQ4vlWg2I/AAAAAAAAAEI/9RNn_e0dmXE/s320/Tubes.jpg" alt="" id="BLOGGER_PHOTO_ID_5493143475028656994" border="0" /></a>Length: 21"<br />Diameter: 1.64"<br />Altitude: 1500'<br />Skill Level 3 maybe a high 2<br /><br /><br />And it came to pass that as I was working on my other rockets this past week a vision was opened unto me. And I beheld a Rocket, and the rocket was about one cubit in length. And I beheld that it had thre fins upon three tubes that rested within the bossem of the rocket.<br /><br /><br /><br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/__7oFVxcaSfs/TD5j-4_39CI/AAAAAAAAAEQ/JucjU8GYujs/s1600/Rockets+010.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 320px; height: 240px;" src="http://3.bp.blogspot.com/__7oFVxcaSfs/TD5j-4_39CI/AAAAAAAAAEQ/JucjU8GYujs/s320/Rockets+010.jpg" alt="" id="BLOGGER_PHOTO_ID_5493938527541916706" border="0" /></a>And I beheld that I had the components for such a rocket. Therefore, I did open the program Rocksim and did create a new file. And I beheld the file that it did bring exceedingly great joy to me. Therfore I began to lay out the rocket and to cut the centering rings and to trace the fin templates onto balsa. And the workmanship was exceedingly fine for it was mine, or in other words it was good enough for who it was for. Wherefore it did enter into my heart to finish building this rocket that it may one day ascend to heaven and there deploy its parachute and descend slowly again unto the earth from whence it was taken and to then rise again and again and bring joy to all who behold it. And again I say unto you that if your faithful unto the hobby of model rocketry that this rocket will bring you joy and rejoicing all the days of your life. And thus it is. Amen.<br /><br />I hope that wasn't to blasphemous.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com2tag:blogger.com,1999:blog-7950039175845478831.post-70605194671937822452010-07-11T18:17:00.006-05:002010-07-11T20:23:25.579-05:00ProjectsSo this past Wednesday I got a package from the wonderful people at Balsa Machining Service (BSM) which contained everything I needed to build Two rockets that I have been looking forward to building for some time now. The first is the Classic Orbital Transport.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpRxEKYEXI/AAAAAAAAADY/lN2EwdtrU60/s1600/Rockets+002.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 320px; height: 240px;" src="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpRxEKYEXI/AAAAAAAAADY/lN2EwdtrU60/s320/Rockets+002.jpg" alt="" id="BLOGGER_PHOTO_ID_5492792598904443250" border="0" /></a><br /><br />I have wanted one for along time. Orbital Transport is probably the rocket that got me interested in rockets in the first place. I used to spend hours down in the crawl space playing with my dads model and just imagining it fly. Then I found the instructions and decals for it on line so I bought the stuff my dad needed to fix his, (I was not the one that broke it in case you were wondering) printed a new sheet of decals and finally got to see it fly. Then I found out that BSM sold the fins for it laser cut and everything so I decided I would build my own. I bought the fins well over a year ago when I got the parts to build The Dart and have been waiting for the next time I ordered to get the nose cones and other things which I needed. It just didn't make much sense to pay $6.00 shipping for $2.00 Nose cones. Anyway the result is below, ready for sanding sealer and paint. The above picture is of my jig to keep the fins straight while the glue dried. I knew those old text books would come in handy.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpSUCfw-kI/AAAAAAAAADg/_qkQHP9w2Eg/s1600/Rockets+007.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 240px; height: 320px;" src="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpSUCfw-kI/AAAAAAAAADg/_qkQHP9w2Eg/s320/Rockets+007.jpg" alt="" id="BLOGGER_PHOTO_ID_5492793199752706626" border="0" /></a><br /><br />My second project is the rear ejection design mentioned in my last post. It was a good build that I wish I had taken more pictures of because certain aspects of it would be difficult to just explain.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpWAVI7wKI/AAAAAAAAADo/Mkm8Q8cUoX0/s1600/Rockets+001.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 240px; height: 320px;" src="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpWAVI7wKI/AAAAAAAAADo/Mkm8Q8cUoX0/s320/Rockets+001.jpg" alt="" id="BLOGGER_PHOTO_ID_5492797259206344866" border="0" /></a><br />The first step wast to cut the tubes to length and mark them and then cut out the slits for the ejection gases. Once that was done I realized that there would be a lot more to building this rocket than I had originally anticipated. The most significant challenges was how to mount the shock cord and then there was no room for recovery wadding. So I could make the rocket go up but the landing part wouldn't be pretty.<br /><br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpWA1pN4LI/AAAAAAAAADw/KAc92vePL00/s1600/Rockets+004.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 320px; height: 240px;" src="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpWA1pN4LI/AAAAAAAAADw/KAc92vePL00/s320/Rockets+004.jpg" alt="" id="BLOGGER_PHOTO_ID_5492797267931685042" border="0" /></a>So here is my solution put a screw eye in the forward bulkhead attach the shock cord to that and then stick a BT-5 body tube around it until it is into the recovery payload tube. The above picture shows how I used a spent 13mm motor to attach the body tube. By the way if you like to design and build your own rockets I recommend keeping your spent motor casings and investing in a miter box and razor saw. They make great centering rings and tube couplers and thrust blocks and are a lot cheaper, but I digress. I then had to figure out a way to get the thing into position without gluing the shock cord to the side of the body tube. This involved another BT-5. The recovery wadding problem I solved by using a baffle made out of stainless steel kitchen scrubby pad stuff. Again I wish I had taken a picture.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/__7oFVxcaSfs/TDpWBdRdrHI/AAAAAAAAAD4/Kwtpgc1OVhw/s1600/Rockets+009.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 320px; height: 240px;" src="http://3.bp.blogspot.com/__7oFVxcaSfs/TDpWBdRdrHI/AAAAAAAAAD4/Kwtpgc1OVhw/s320/Rockets+009.jpg" alt="" id="BLOGGER_PHOTO_ID_5492797278569475186" border="0" /></a>Keeping the fins on the rocket and straight has always been a challenge. Again the text books came in handy. As a random side not I used my Statics &Dynamics, Space systems elements, Propulsion, Mechanics of Flight and Numerical methods books. To mark the tube I drew the angles on a pizza box and cut out a hole for the body tube.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpWBidiP0I/AAAAAAAAAEA/FXk_gu0uao8/s1600/Rockets+011.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 240px; height: 320px;" src="http://1.bp.blogspot.com/__7oFVxcaSfs/TDpWBidiP0I/AAAAAAAAAEA/FXk_gu0uao8/s320/Rockets+011.jpg" alt="" id="BLOGGER_PHOTO_ID_5492797279962283842" border="0" /></a><br />And here is the final product. Ready for sanding sealer and paint. All in all it was a good build and I am excited to finish and fly it.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-28444839184485588782010-07-03T17:42:00.003-05:002014-12-25T15:35:35.291-06:00Rear Ejection<a href="http://2.bp.blogspot.com/__7oFVxcaSfs/TC-9A3wVuFI/AAAAAAAAADQ/EHeN9cN1NO4/s1600/Rear+Ejection.jpg" onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}"><img alt="" border="0" src="http://2.bp.blogspot.com/__7oFVxcaSfs/TC-9A3wVuFI/AAAAAAAAADQ/EHeN9cN1NO4/s320/Rear+Ejection.jpg" id="BLOGGER_PHOTO_ID_5489814293452273746" style="cursor: pointer; float: right; height: 284px; margin: 0pt 0pt 10px 10px; width: 350px;" /></a>Length: 21"<br />
Diameter: 1.64"<br />
Altitude: 1000'-2000'<br />
Skill Level 3<br />
<br />
This one is easily my most ambitious project to date. This rocket combines two things that I have always wanted to try; Clustered motors and rear ejection recovery. What I did was put the parachute in the motor mount tube seal off a chamber a few inches above that and put two motors, one per pod, and pipe the gases into the recovery section. <br />
<br />
This design provides a few very nice features. First off, by having the motor and recovery systems neatly packaged at the back of the rocket it leaves most of the length of the body for payload. It is completely isolated from the hot ejection gases so who knows what you could put in there. An additional feature that is more useful if you are more like me and like to just fly the rocket is the fact that because you have two motors you have a redundant recovery deployment system. If one motor doesn't do it the second one might.<br />
<br />
I just ordered the parts to build this one a few days ago so I will let you know how it goes when I finally fly it.<br />
<br />
<h3>
<u>UPDATE(12/25/2014)</u></h3>
So I flew this one back in October on two B6-4's with an altimeter on board. It flew to 332 feet which was only 3 ft off of what RockSim Predicted. This is quickly becoming one of my favorite rockets.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com1tag:blogger.com,1999:blog-7950039175845478831.post-89827002798456978562010-07-03T17:20:00.003-05:002010-07-03T17:34:29.925-05:00Super Ninja<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/__7oFVxcaSfs/TC-4_jnPIXI/AAAAAAAAADI/WNyJkLbu1QA/s1600/Super+Ninja.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 320px; height: 260px;" src="http://3.bp.blogspot.com/__7oFVxcaSfs/TC-4_jnPIXI/AAAAAAAAADI/WNyJkLbu1QA/s320/Super+Ninja.jpg" alt="" id="BLOGGER_PHOTO_ID_5489809872819003762" border="0" /></a><br />Length: 23.1<br />Diameter: 0.976<br />Altitude: 2600'<br />Skill Level 2<br /><br />The super ninja was suposed to be an upscaled version of the Ninja made by Estes. My younger brother got the Ninja for Christmas one year but since he wasn't into rockets very much at all he gave it to me. I liked it so much that I decided to try to make it bigger. The fins are an acurate scale but I had to make the rocket longer and add weight to the nose to get it stable. What I was trying to accomplish with this rocket as well was the ability to fly it on A-E Black powder motors. It worked ish. On the first flight I lost the adapter that I built and I think that since then the body tube got crushed. The short story here is that this one has yet to reach its full potential.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-61390572389917264192010-07-03T12:09:00.003-05:002010-07-03T13:51:18.856-05:00Drifter<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/__7oFVxcaSfs/TC9vFhHOecI/AAAAAAAAAC4/y5lB9g6OOFk/s1600/Drifter.jpg"><img style="float: left; margin: 0pt 10px 10px 0pt; cursor: pointer; width: 320px; height: 260px;" src="http://2.bp.blogspot.com/__7oFVxcaSfs/TC9vFhHOecI/AAAAAAAAAC4/y5lB9g6OOFk/s320/Drifter.jpg" alt="" id="BLOGGER_PHOTO_ID_5489728611366631874" border="0" /></a>Length: 23.83"<br />Diameter: 1.64<br />Altitude: 770'<br />Skill Level 1<br /><br />This is another spare parts rocket that I threw together. I call it drifter because I put a 24" chute in it. I have noticed that my biggest strugle when comes to desiging custom rockets is the paint. I had this rocket put together for weeks and weeks before I decided how to paint it. What I eventualy decided on was silver with a metalic blue base that kind of feathered into the rest of the rocket. My wife really liked how it turned out. Again this one is a virgin as I have not yet had a chance to fly it.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/__7oFVxcaSfs/TC-GjSzAduI/AAAAAAAAADA/3M7howA-yBo/s1600/Drifter+002.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 240px; height: 320px;" src="http://3.bp.blogspot.com/__7oFVxcaSfs/TC-GjSzAduI/AAAAAAAAADA/3M7howA-yBo/s320/Drifter+002.jpg" alt="" id="BLOGGER_PHOTO_ID_5489754411687245538" border="0" /></a>Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com1tag:blogger.com,1999:blog-7950039175845478831.post-423678529438488572010-07-03T10:56:00.008-05:002010-07-03T11:20:13.513-05:00Epic FailuresNot everything always goes the way you plan and somethings look better on the computer or on paper than they do in reality The following are some examples of my "not so Successful designs.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/__7oFVxcaSfs/TC9eSNTIcbI/AAAAAAAAACQ/Vfl8d10mbfM/s1600/High+Altitude.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 320px; height: 260px;" src="http://2.bp.blogspot.com/__7oFVxcaSfs/TC9eSNTIcbI/AAAAAAAAACQ/Vfl8d10mbfM/s320/High+Altitude.jpg" alt="" id="BLOGGER_PHOTO_ID_5489710137688486322" border="0" /></a><br /><br />This first one was hatched as a high flying performance rocket. I had just purchased the Rocksim software and was excited to try my hand. so I made it as light as possible to maintain the proper static margin. The problem was that I didn't realize that what Rocksim was reporting as static margin was just that as a ratio of the diameter of the rocket so I tweaked the design until it said that I was at .6 or about what the diameter of the rocket was in inches. It first flew on an A8-3 just to make sure it was stable and it was. So I then put in a C6-5 and the rocket proceeded to do cart-wheels until it lawn darted. I think that when the ejection charge went off that the motor casing went Higher than the rocket did. I have since changed the design to fix the stability problem but I have not yet rebuilt and re-tested the rocket.<br /><br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/__7oFVxcaSfs/TC9f4eDCHQI/AAAAAAAAACY/NUzLCrK87D0/s1600/Delta+II.jpg"><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;width: 320px; height: 260px;" src="http://1.bp.blogspot.com/__7oFVxcaSfs/TC9f4eDCHQI/AAAAAAAAACY/NUzLCrK87D0/s320/Delta+II.jpg" border="0" alt=""id="BLOGGER_PHOTO_ID_5489711894531022082" /></a><br /><br />This was supposed to be a scale model of Boeing's Delta II launch vehicle. What it is is a complete disaster that I was lucky enough not to kill somebody with. It has an oak nose cone to get the CG "far enough forward". Its first flight went ok, it went up and wobbled a little bit and then deployed the chute just fine. The second flight I try to block from my memory. The rocket now has a very prominent place in the darkest corner of my closet. I think it could work if I put fins on it.... Now there's an Idea!<br /><br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/__7oFVxcaSfs/TC9hRjh2aHI/AAAAAAAAACg/27zomLE2SPk/s1600/Striker.jpg"><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;width: 320px; height: 260px;" src="http://2.bp.blogspot.com/__7oFVxcaSfs/TC9hRjh2aHI/AAAAAAAAACg/27zomLE2SPk/s320/Striker.jpg" border="0" alt=""id="BLOGGER_PHOTO_ID_5489713425010813042" /></a><br /><br />I call this one Striker. The coolest feature of this "rocket" is an outboard motor pod that ejects the parachute from the main body tube. It was a fun build and an epic flop at launch time. Fortunately I launched it in January and there was some fresh snow to soften the blow.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/__7oFVxcaSfs/TC9iFum9QYI/AAAAAAAAACo/c2AZA-lp9VQ/s1600/100_2003.JPG"><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;width: 320px; height: 214px;" src="http://1.bp.blogspot.com/__7oFVxcaSfs/TC9iFum9QYI/AAAAAAAAACo/c2AZA-lp9VQ/s320/100_2003.JPG" border="0" alt=""id="BLOGGER_PHOTO_ID_5489714321338220930" /></a><br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/__7oFVxcaSfs/TC9iF35UvPI/AAAAAAAAACw/iXQvTquNhjw/s1600/100_2005.JPG"><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;width: 214px; height: 320px;" src="http://1.bp.blogspot.com/__7oFVxcaSfs/TC9iF35UvPI/AAAAAAAAACw/iXQvTquNhjw/s320/100_2005.JPG" border="0" alt=""id="BLOGGER_PHOTO_ID_5489714323831176434" /></a><br /><br />Again the motor casing went higher and farther than the rocket. On a more positive note I picked the thing up and chucked it and it flew halfway back to the car in a very pretty glide. I think with some more tweaking and a bunker I could get this design to work.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-56876706123446086892010-07-03T10:24:00.002-05:002010-07-03T10:33:49.521-05:00Bumble BEE<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/__7oFVxcaSfs/TC9WKIb8rRI/AAAAAAAAACI/rsQsS6OHv2Y/s1600/Bummble+BEE.jpg"><img style="float: left; margin: 0pt 10px 10px 0pt; cursor: pointer; width: 320px; height: 260px;" src="http://2.bp.blogspot.com/__7oFVxcaSfs/TC9WKIb8rRI/AAAAAAAAACI/rsQsS6OHv2Y/s320/Bummble+BEE.jpg" alt="" id="BLOGGER_PHOTO_ID_5489701202851310866" border="0" /></a>Length: 12.063"<br />Diameter: 1.32"<br />Altitude: 1200'<br />Skill Level 2ish<br /><br />The Bumble BEE was conceived as a, " What am I going to do with that nose cone?" project. I think the nose cone came in a pack I bought when I built stratosphire and had been floating around for years since. The body tube was the left overs from building the Pickerel and the idea of having the motor mount hang out the back end came from Design 1 ( I really need to come up with a name for that thing) and needing more space for the streamer and recovery wadding. I haven't flown this one yet so hopefully it really works.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com1tag:blogger.com,1999:blog-7950039175845478831.post-3239575611669080412010-07-03T08:59:00.000-05:002010-07-03T09:03:17.723-05:00Mini Sport<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/__7oFVxcaSfs/TC9CQ4iALQI/AAAAAAAAACA/5LIeMtuJ_zk/s1600/Mini+Sport.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 320px; height: 260px;" src="http://1.bp.blogspot.com/__7oFVxcaSfs/TC9CQ4iALQI/AAAAAAAAACA/5LIeMtuJ_zk/s320/Mini+Sport.jpg" alt="" id="BLOGGER_PHOTO_ID_5489679328608267522" border="0" /></a>Length: 15.01"<br />Diameter: 0.554"<br />Altitude: 840'<br />Skill Level 1<br /><br />This is another one of my favorites because it is just so simple. It is a 13 mm minimum diameter design. This one is lots of fun to watch as well. not much to say really, it is a very simple design that works well.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-21161478011984124682010-07-03T08:46:00.000-05:002010-07-03T08:55:39.741-05:00The DartLength: 28.375"<br />Diameter: 1.64"<br />Projected Altitude: 3300'<br />Skill level 3<br /><br />After my initial success with staged rockets I decided to see just how high I could get one to go on Estes black powder motors and this is what I came up with. it is a 24 mm D12-D12-E9 combo that I'm sure would disappear if ever launched in that configuration. I planned to launch it at the Pony Express Test Range or the Salt Flats in Utah but moved before I got the chance. The hardest part of building this one was getting the fins to line up straight with one another and mesh close enough to get the seamless look that I was going for.<br /><br /><div style="text-align: center;">3 Stage<br /></div><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/__7oFVxcaSfs/TC9AmzdXArI/AAAAAAAAABo/05eNj1lq7yE/s1600/The+Dart+3+stage.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 320px; height: 260px;" src="http://4.bp.blogspot.com/__7oFVxcaSfs/TC9AmzdXArI/AAAAAAAAABo/05eNj1lq7yE/s320/The+Dart+3+stage.jpg" alt="" id="BLOGGER_PHOTO_ID_5489677506180481714" border="0" /></a><br /><br /><div style="text-align: center;">2 Stage</div><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/__7oFVxcaSfs/TC9AnL2VLFI/AAAAAAAAABw/AIpKpb3EBqQ/s1600/The+Dart+2+Stage.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 320px; height: 260px;" src="http://3.bp.blogspot.com/__7oFVxcaSfs/TC9AnL2VLFI/AAAAAAAAABw/AIpKpb3EBqQ/s320/The+Dart+2+Stage.jpg" alt="" id="BLOGGER_PHOTO_ID_5489677512727669842" border="0" /></a><br /><br /><div style="text-align: center;">Single Stage</div><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/__7oFVxcaSfs/TC9AndTxDdI/AAAAAAAAAB4/iUinG7jUbAA/s1600/The+Dart+single+stage.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 320px; height: 260px;" src="http://4.bp.blogspot.com/__7oFVxcaSfs/TC9AndTxDdI/AAAAAAAAAB4/iUinG7jUbAA/s320/The+Dart+single+stage.jpg" alt="" id="BLOGGER_PHOTO_ID_5489677517414534610" border="0" /></a><br /><br /><div style="text-align: center;"><br /></div>Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-92113098693698951362010-07-02T17:57:00.000-05:002010-07-03T08:36:30.935-05:00The Pickerel<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/__7oFVxcaSfs/TC6hEpqPLsI/AAAAAAAAABg/YU2-r-pKQjc/s1600/Pickerel.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 320px; height: 260px;" src="http://2.bp.blogspot.com/__7oFVxcaSfs/TC6hEpqPLsI/AAAAAAAAABg/YU2-r-pKQjc/s320/Pickerel.jpg" alt="" id="BLOGGER_PHOTO_ID_5489502097085771458" border="0" /></a><br />Length: 16.67<br />Diameter: 1.32<br />Projected Altitude: 1000'<br />Skill Level: 1<br /><br />This is a scaled version of my senior design project. It was designed by the 2008-2009 USU Chimaera team. We entered a NASA competition to build a high power rocket that would carry a scientific payload to an altitude of one mile AGL. This rocket was built to test the stability of the design. Ultimately we won the competition. If I had $5000 just lying around I would totally build the full size version because it was an awesome rocket.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-83471401257796198052010-07-02T17:22:00.000-05:002010-07-02T17:54:48.700-05:00StratosphireLength: 38.9"<br />Diameter: 1.32"<br />Projected Altitude: 2500'<br />Skill Level: 2<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/__7oFVxcaSfs/TC5m97InonI/AAAAAAAAABY/3At4OltywoA/s1600/Stratosfire.jpg"><img style="float: left; margin: 0pt 10px 10px 0pt; cursor: pointer; width: 320px; height: 260px;" src="http://3.bp.blogspot.com/__7oFVxcaSfs/TC5m97InonI/AAAAAAAAABY/3At4OltywoA/s320/Stratosfire.jpg" alt="" id="BLOGGER_PHOTO_ID_5489438209843110514" border="0" /></a><br /><br />My first custom designed rocket. My dad had a Comanche III kit that I had seen in the basement for years and years then I saw it fly and I wanted to one-up it. This thing goes on two 24 mm boosters and then an 18 mm upper stage. Flies like a dream. Also is sleek looking single stage<br />The last time I launched it staged the Stages failed to separate and were gutted by the motor exhaust. I since have modified the design to avoid similar disasters in the future.<br /><br /><br /><br /><br /><iframe allowfullscreen='allowfullscreen' webkitallowfullscreen='webkitallowfullscreen' mozallowfullscreen='mozallowfullscreen' width='320' height='266' src='https://www.blogger.com/video.g?token=AD6v5dy8IeKLBtB6hz79769rwDw9zX759lKl4CUGuJO63A4yX4ObAbUWIp_B-s8cRKIYF7tyR_v8ausUpmT2mIxvsQ' class='b-hbp-video b-uploaded' frameborder='0'></iframe>Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0tag:blogger.com,1999:blog-7950039175845478831.post-59504496355789800582010-07-01T21:33:00.002-05:002010-07-10T17:23:51.436-05:00Shock Wave<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/__7oFVxcaSfs/TC1Rxy6zliI/AAAAAAAAAAw/lXxZyclci1A/s1600/Design+1.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 320px; height: 260px;" src="http://2.bp.blogspot.com/__7oFVxcaSfs/TC1Rxy6zliI/AAAAAAAAAAw/lXxZyclci1A/s320/Design+1.jpg" alt="" id="BLOGGER_PHOTO_ID_5489133436758365730" border="0" /></a><br />This Design is unnamed as of yet. I got the idea for this rocket as I was scratch building the old Astron Trident model from instructions I found on the internet. As I was waiting for the glue to dry on the motor mount section I looked at it and thought to my self put fins on it and call it good. So I did. This one will fly 1500' on an Estes C6-7 and is a fun one to fly. Probably one of my favorite designs. I would class this as a Skill level 2 rocket.<br /><br />Length: 12.25"<br />Diameter: 0.976Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com1tag:blogger.com,1999:blog-7950039175845478831.post-28994483015766044402010-07-01T21:25:00.000-05:002010-07-01T21:31:05.724-05:00I love Rockets. What else can I say.My dad started flying rockets when he was a teen and it has run in the family ever since. I personally have gotten in deeper than anyone else in my family to this point and I am trying to make my career with rockets. So naturally I have come up with some of my own designs which of course I think are pretty sweet, but I am curious to know what other Rocket enthusiasts think. So take a look and let me know.Maloertscherhttp://www.blogger.com/profile/10094764528081089415noreply@blogger.com0